Performance evaluation of solar panels under different dust accumulation conditions using thermography: focusing on PV temperature variation.

Degradation performance of photovoltaic modules (SPV) by real conditions has become increasingly problematic. In dusty areas, dust accumulation is one of the main concerns that may cause a significant determination of SPV efficiency. In the current study, the effect of four dust-accumulated densities of 6, 12, 18, and 24 g/m² have been investigated in outdoor conditions in Cairo, Egypt. The performance evaluation of SPV modules in the form of front and backside temperatures of the SPV module has been evaluated in addition to current, voltage, power, and efficiency of the SPV modules. The results showed that, as compared with a clean SPV module, with increasing dust density from 6 to 24 g/m² the frontside temperature of SPV modules were lower by 6–8 ℃. While their backside temperatures were found to be higher by 2–6 ℃. In addition, the difference between the backside and frontside temperatures of the SPV module ranged from 5 to 14 ℃ for dust modules as compared with 3 ℃ for the clean SPV module. The output power and efficiency of dusty SPV modules were found to be lower by 6–45% and 13–38%, respectively as compared with clean SPV module. The results clearly showed the importance of properly maintaining and servicing the SPV modules to avoid their degradation by dust accumulated. [ABSTRACT FROM AUTHOR]

Copyright of Materials for Renewable & Sustainable Energy is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)