Anaerobic Digestion of Spoiled Maize, Lucerne and Barley Silage Mixture with and without Cow Manure: Methane Yields and Kinetic Studies.

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • Additional Information
    • Subject Terms:
    • Abstract:
      The effect of different inoculum-to-substrate ratios (ISRs) and feed mix (FM) ratios on the kinetics of methane production and yields during anaerobic digestion of spoiled silage mixture (SM) alone or co-digestion with cow manure (CM) was investigated in batch experiments at 37 °C. The silage mixture was prepared from spoiled silages of maize, lucerne and barley in equal proportions of 33% by wet weight. The effect of ISRs of 0.5, 1, 2 and 4 showed that methane yields increased with an increased ISR ratio. At ISRs of 1, 2 and 4, methane yields of 262.18 ± 14.96, 387.77 ± 14.43 and 482.23 ± 38.47 NmL CH4/gVSadded were obtained, respectively. Incubation at ISR 0.5 resulted in low methane yields (174.49 ± 9.29 NmL CH4/gVSadded) due to build-up of volatile fatty acids (VFAs). Further, co-digestion of spoiled SM with CM showed that the highest methane yields of 387.77 and 382.86 NmL CH4/gVSadded were obtained at SM:CM feed mix ratios of 100–0 and 75–25, respectively. The corresponding volatile solids (VS) removal rates were 72.80% and 70.82%, respectively. However, the best synergistic effect was noticed at a SM:CM = 50–50 feed mix ratio. Thus, this study shows that anaerobic digestion of spoiled silages is feasible and co-digestion of spoiled silage mixed with cow manure at a SM:CM feed mix ratio of 75–25 is recommended. [ABSTRACT FROM AUTHOR]
    • Abstract:
      Copyright of Energies (19961073) is the property of MDPI and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)