Item request has been placed!
×
Item request cannot be made.
×
Processing Request
Assessment of Occupational Exposure to Noise among Sawmill Workers in the Timber Processing Factories.
Item request has been placed!
×
Item request cannot be made.
×
Processing Request
- Additional Information
- Subject Terms:
- Abstract:
In the workplace, exposure to noise levels at or above 85 dB(A) can increase the risk for the development of noise-induced hearing loss (NIHL). Sawmill workers are continuously exposed to noise levels above 85 dB(A) and they had to raise their voices when they communicate if they are 1 m away from each other. The study was conducted to measure and determine the time-weighted average (TWA) occupational exposure levels to noise in the timber processing factories and compare the results with the noise rating limits. Personal and area noise survey was under-taken using a calibrated SV104IS noise dosimeters (Svantek, Poland) and integrating type 1 sound level meter (Soundpro SE/DL, U.S.A.). Data was analyzed using Microsoft Office Excel 2019 Analysis Tool Pak for descriptive statistics. Both the geometric means and standard deviation as well the minimum and maximum values were determined. The geometric mean (GSD) for area noise exposure levels at sawmill A was 90.05(8.02) dB(A) while at sawmill B was 90.14(7.94) dB(A). Furthermore, the geometric mean (GSD) for personal noise exposure level at sawmill A was 92.26(4.35) dB(A) while at sawmill B was 92.24(2.65) dB(A). The results revealed that sawmill workers were exposed to high noise level above the 85 dB(A) noise rating limit and were at moderate-to-high risk of suffering from NIHL. [ABSTRACT FROM AUTHOR]
- Abstract:
Copyright of Applied Artificial Intelligence is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
No Comments.